国产精品久久久久久爽爽爽,变态拳头交视频一区二区,国产高清在线精品一区二区三区,国产福利一区二区三区在线视频 ,国产极品久久久久久久久

首頁 > 粉體測試設備 > 光譜檢測分析儀 >
LOS激光干涉儀
LOS激光干涉儀

參考價格

面議

型號

品牌

產地

美國

樣本

暫無
光傲科技股份有限公司

會員

|

第2年

|

生產商

工商已核實

留言詢價
核心參數
產品介紹
創新點
相關方案
相關資料
用戶評論
公司動態
問商家
留言詢價
×

*留言類型

*留言內容

*聯系人

*單位名稱

*電子郵箱

*手機號

提交

虛擬號將在 180 秒后失效

使用微信掃碼撥號

為了保證隱私安全,平臺已啟用虛擬電話,請放心撥打(暫不支持短信)
×
是否已溝通完成
您還可以選擇留下聯系電話,等待商家與您聯系

需求描述

單位名稱

聯系人

聯系電話

Email

已與商家取得聯系
同意發送給商家
產品介紹
創新點
相關方案
相關資料
用戶評論
公司動態
問商家

LOS雙頻激光干涉儀是以波長作為標準對位移和幾何量進行度量的儀器,LOS采用了自制的穩頻激光作為激光光源,精度可達到n m量級。LOS可以在很遠的距離達到很高的測試精度和解析度。

LOS系統應用范圍廣,除了可用于長度的精密測量外,配上適當?shù)母郊€可測量角度、直線度、平面度、振動距離及速度等等。

該公司同時提供基于CCD的幾何度量系統,使得測量更加靈活、快速,并保證精度。

主要特點:

  • 3年內激光波長精度不低于 0,02 ppm.
  • 激光10年內滿足測試要求
  • 激光無需采用任何穩頻措施(如加熱)
  • 無需預熱,開機即可開始測量(一般激光需要預熱,使得激光波長穩定下來)
  • 激光波長精度不受反射激光影響?。ㄒ话愕募す飧缮鎯x反射可導致嚴重的測量誤差)
  • 提供激光氣體更換服務,即10年后,可以更換激光管的氣體,達到新激光管的性能(擁有自己的**HeNe激光生產技術)
  • 空氣和材料溫度傳感器等均采用無線連接,安裝和使用簡單易用。
  • 通訊界面可以選 Ethernet, USB and WiFi,并自帶獨立顯示器
  • 標準質保期 36 個月(3年)

測量參數:

  • 位置測量 Position
  • 速度 Velocity
  • 加速度 Acceleration
  • 線性,準直度 Straightness
  • 矩形 Squareness
  • 角度 Angles
  • 平面面型 Flatness
  • 平行度 Parallelism

應用領域:

Machinery機械行業
機床校正和補償 Machine tool calibration and compensation

三坐標測量機校正 Calibration of CMMs

測量儀器校正 Calibration of measuring devices

產品質量控制 Production quality control

幾何尺寸測量 Measurement of dimensions

機床調整,對中 Adjustment and alignment of machines and devices

機床維護 Maintenance of machines

高精度機床內部Internal measurement system for high-accuracy machines

螺桿質量測試 Lead screw verification

動態測量 Dynamic measurement

航空和汽車工業 Aircraft and automobile industry
大尺寸工件高精度測量 Measurement and checking of large dimensions
計量校正 Metrology and calibration institutes
作為長度標準,具有不同的應用 The system is used in various applications as a length standard
微電子行業 Microelectronic industry
The internal multiaxis system for high precision positioning mechanisms with both open and closed control loop, e.g.

- step and repeat cameras

- testing of semiconductor wafers

- laser writing machines

Other applications
任何需要對位置和幾何參數精密測量的行業和應用,以及研發、科學研究等領域

動態測試功能:

LOS 雙頻激光干涉儀可以進行動態測試,采樣頻率可達500Hz, 完成測量后,即可進行數據處理,可以按照需要的格式進行顯示和打印。 WinScope軟件除了可以提供測試的數值外,還有許多便利的功能,如,觸發模式設置,計算和統計功能, FFT快速傅里葉變換算法,光譜分析, 強大的圖形顯示等.
位移,速度、加速度測試
閱讀: 1806
Standard LOS System configuration is designed to measure position, velocity and acceleration. A typical application is the calibration of positional accuracy of CNC machine tools. In this measurement the difference between the desired and actual position of the machine's moving part is evaluated. The method of measurement and evaluation corresponds to international standards (ISO 230-2, VDI/DGQ 2617,3441, NMTBA). The whole measurement process and printing of protocol is controlled by the computer programme and is fully automatic.
Software Compensation of Machine Tool Positional Errors
The measured positional errors can be transferred as correction data on line into the machine tool control system immediately after measurement. Considerable improvement of positional accuracy can thus be achieved in a minimum time. The producer delivers software modules which compensate for various control systems (SIEMENS, HEIDENHEIN, DYNAPATH, SELCA, YASNAC, FANUC, ACRAMATIC).
Further Applications

Positional accuracy of a co-ordinate measurement machine can be calibrated in a similar way (VDI 2617 standard). The LOS system is used also for the calibration of dimensional gauges. Laser systems cannot be replaced when precision measurement of long distances (up to 40 meters) is required.

Technical Specifications
Measurement range0 - 40 m
Resolution1.25 nm (lambda/512)
Accuracy in vacuum10-7 x measured length ± resolution ± 0.6 nm
Accuracy with the LS70 Comp. unit(0 - 40°C ): 1µ/m
Max. velocity1 m/s - PC card LS 30.11

2 m/s - PC card LS 30.12

線性度 Straightness 測量
閱讀: 1808
Errors in straightness of movement and in parallelity of axes can be measured by the LS 127ST set. The laser beam is split in the LS 127.1 differential beamsplitter into two parallel beams. After going through the optical wedge LS 127.2 the beams diverge at a small angle. The optical wedge functions as the straightness sensor. Reflector LS 127.3, formed by two inclined extremely precise plane mirrors, returns the beams back into the differential beamsplitter. The axis of the mirror reflector defines the straight line reference. This straightness measurement method is less sensitive to air turbulence disturbances than other methods. This straightness set also shows low sensitivity to possible inclinations of the straightness sensor during its movement at measurement.
The standard configuration for position measurement except the LS 20.1, LS 21.1, LS 70, LS 90.1, LS 90.3 is used for straightness measurement. The optical parts are fixed by the set of holders LS 51.

技術參數

Longitudinal measurement range3 m (or according to requirements)
Transverse measurement range±3 mm
Measurement Accuracy(± 0,005 X ±0,5 ±0,3 M2 ) µm

X - measured deviation in µm

M - measured longitudinal distance in m

創新點

暫無數據!

相關方案
暫無相關方案。
相關資料
暫無數據。
用戶評論

產品質量

10分

售后服務

10分

易用性

10分

性價比

10分
評論內容
暫無評論!
公司動態
暫無數據!
技術文章
暫無數據!
問商家
  • LOS激光干涉儀的工作原理介紹?
  • LOS激光干涉儀的使用方法?
  • LOS激光干涉儀多少錢一臺?
  • LOS激光干涉儀使用的注意事項
  • LOS激光干涉儀的說明書有嗎?
  • LOS激光干涉儀的操作規程有嗎?
  • LOS激光干涉儀的報價含票含運費嗎?
  • LOS激光干涉儀有現貨嗎?
  • LOS激光干涉儀包安裝嗎?
LOS激光干涉儀信息由光傲科技股份有限公司為您提供,如您想了解更多關于LOS激光干涉儀報價、型號、參數等信息,歡迎來電或留言咨詢。
  • 推薦分類
  • 同類產品
  • 該廠商產品
  • 相關廠商
  • 推薦品牌
手機版:
LOS激光干涉儀
同品牌產品
OEM RU40/90
關注度 789
光譜可調燈箱
關注度 692
光譜可調光源
關注度 761
免費
咨詢
手機站
二維碼